# Fast Fourier Transform

## #

DescriptionThe signal processing block `FFT`

calculates the Fast Fourier Transform of an input.

#### #

InputThe input is `MxN`

.

#### #

OutputThe output is `KxN`

which is the FFT of the input signal `MxN`

. The size `K`

is dependent on the mode and number
of points of the FFT.

## #

AttributesAttribute | Value |
---|---|

Name | FFT |

Mode | Full |

Points | โ 8192 |

Window | Rectangle |

Overlap | โ 0 |

Channels | 1 |

*Values with* โ *can receive external input.*

#### #

NameName specifies the name of the block.

#### #

ModeMode specifies the output of the FFT. The mode can either be `Full`

which produces the full point FFT, or `Half`

which produces a N/2-1 point FFT multiplied by two to give the correct level.

#### #

PointsPoints is the number of points in the FFT.

If the number of points is larger than the inputs `M`

, the input `M`

is zeropadded. If the number of points is lower
than the inputs `M`

then an average of multiple FFT's is calculated.

#### #

WindowWindow species the windowing used in the FFT. This can be chosen to one of the following:
`Barthann`

, `Bartlett`

, `Blackman`

, `Blackmanharris`

, `Bohman`

, `Boxcar`

, `Cosine`

, `Flattop`

, `Hamming`

, `Hanning`

, `Nuttall`

, `Rectangle`

, `Triangle`

.

#### #

OverlapOverlap specifies the overlap in points if multiple FFT are calculated.

#### #

ChannelsChannels specifies the number of input(s)/output(s) the block will have.